News
  • News details
    News classification:Industry information   author:handler    Published in:2018-12-244    Written words:【large】【in】【small

    Music quality refers to the sensory characteristics of sound. The frequency of the vocal body vibration determines the pitch, the amplitude of the vocal body vibration determines the loudness, and the material and structure of different vocal bodies determine the timbre of the sound. As a term describing the quality of an instrument's pronunciation, it represents the quality of the same instrument's pronunciation in different sound areas. Because each instrument has its own spectrum distribution characteristics, its timbre is basically fixed.

    Jiashuokang Electronics Horn Manufacturer has rich terms of timbre, mainly including the following:

    Depression: Depression is given by the same frequency of about 20 Hz, and when it is higher than 80 Hz, the sound will be thicker. Therefore, the basic frequency of the sound with depression is generally very low, and there are few overtone components. The source of the musical instrument with the characteristics of this sense is generally the bass of the bass.

    Heavy: From the perspective of sound sense, heavy sense is the unique sound effect at 80 Hz frequency point, while from the perspective of sound type characteristics, short bass percussion instruments have a stronger sense of stress effect.

    Depression: Depression is often used to describe a sound that is slightly heavier than a dull one. Its fundamental frequency may be the same as that of a dull one, but most of its higher harmonics are richer than that of a dull one.

    Deep: This is an emotional adjective, often used to express a colorful "loose" low-frequency response, its fundamental frequency is slightly higher than the low-pitched sound. The bass area of Cello and Xiao is the most typical instrument with deep feeling.

    Thickness: This kind of sound sense is the characteristic of the broader spectrum sound source, so the thicker sound sense is generally used to describe the lower fundamental frequency and broader spectrum sound source.

    Chun Hou: Chun Hou refers to a typical sound source with a high fusion of low-frequency sound and a sense of Chun Hou, which is the bass area of a steel piano.

    Full: This is the sound sense characteristic of the source whose frequency ranges from 100 Hz to 250 Hz. Generally speaking, the sound source in this frequency band will inevitably have a rich sound sense effect.

    Generous: A fuller source with a wider spectrum produces a generous sound effect.

    Full: This is a strong low-frequency sound, usually equipped with "turbo distortion" effect of electric bass, this sound characteristics are very obvious.

    Bright: Usually when the baseline frequency of the music is higher than 500 Hz, it will become brighter, even at 7500 Hz, we can not say that it is not bright, so the sense of brightness of the sound source is a more general adjective. The brightness is most obvious at 2800 Hz.

    Sound: Usually used to describe high-brightness sound with neck, and when the frequency spectrum is higher than 4000Hz, the sound source does not have this sensory feature.

    Hongliang: Wait for the bright sound with a certain fusion.

    Round: refers to a softer, brighter sound.

    Soft: Compared with roundness, soft feeling is more dull, is a relatively low brightness of the sound.

    Brittleness: Sounds whose spectrum is concentrated between 4000 and 8000 boxes usually have a certain effect of brittleness.

    High-pitched: refers to the clear and crisp sound with high penetration. Suona is a typical musical instrument with this characteristic of sound sense.

    Sharp: Sounds with a spectrum of about 6800 Hz are generally sharp and harsh.

    Sharp: Sharp sound can produce sharp sound effect if it also has a noise similar to distortion.

    Slim: Music with a spectrum of more than 8,000 Hz usually has a slim sound effect.

    Fusion: generally not easy to highlight the soft sound, all have a certain sense of fusion. Of course, all sound sources can be measured by the degree of fusion or non-fusion. In musical instruments, it is generally believed that the sense of integration of Viola and cello is the best.

    Dry and astringent: This is the antonym of the sense of fusion. Generally, the lack of harmonious overtone and the high frequency sound with disharmonious overtone are all dry and astringent to some extent. Among the instruments, he is mainly caused by the lack of resonance in the very high-pitched area.

    Solid: Narrow band sound of about 600 Hz, and short pronunciation, all have a certain auditory effect.

    Cavity: A dull sound with a "dyeing" effect, which is often used to describe the timbre of large woodfish.

    Warmth: This is a word describing the color of music. It is generally proportional to the "chromaticity" of the sound. For example, the arrangement of bells has a secondary sense.

    Rugged: Low-frequency audio with similar effect of overload distortion can form a rugged sound.

    Roughness: Roughness is a kind of rough sound with a slightly sandy tone. Generally, trumpets and horns play in the bass area with this sound characteristics.

    Hoarseness: Specially designed with obvious "air rustle" effect of floating sound.

    Vigorous: This is an emotional adjective, which generally refers to the hoarse sound in the lower frequency band, such as the bass area of the main pipe.

    Tension: This is the result of some special disharmonious overtone components in the music.

    Strength sense: Strength sense in the low frequency band refers specifically to the sound in the 200-500 box band, such as the bass area of drums and beards, the strength sense is better. In the middle and high frequency bands, the sense of intensity refers to the soft sound with high penetration and high prominence. The middle and high tone areas of general treble brass instruments have good effect of the sense of intensity.

    Penetration force: refers to high protrusion, high brightness of the sound, penetration force in the vicinity of 4500 Hz is more obvious.

    Luminance: refers to a high roundness sound with a certain prominence.

    Sadness: Sadness and warmth are opposite to each other. It is also a kind of emotional second. The typical musical instrument source with this sense is the middle of the baritone oboe.

    Share to:
    点击次数:239  更新时间:2018-12-24  【打印此页】  【关闭

Guangzhou Hailangyin Electronics Co., Ltd. Copyright

Address: No. 85 Jinghu Avenue, Xinya Street, Huadu District, Guangzhou, Third Floor, No. 1